Poland Customer Case: Air Shaft & Safety Chuck Winding Machine Upgrade
XW Machinery helped a Polish film winding customer upgrade an original mechanical shaft system with a customized air shaft and 35-type safety chuck, improving roll loading, unloading, and winding efficiency.
A film rewinding customer from Poland was using a traditional mechanical shaft on their production machine. Because the machine was not equipped with an air expanding shaft, loading and unloading material rolls was inconvenient and time-consuming.
The customer did not have a dedicated technical team and could only provide XW Machinery with several machine photos and basic shaft dimensions.
Based on this limited information, our engineering team analyzed the existing rewinding structure and developed two customized upgrade solutions for the customer.
Customer Challenge
The original machine used a conventional mechanical shaft without an air expanding system.
During daily film rewinding production, the operator needed to manually install and remove the roll from the mechanical shaft, making roll changeover inefficient.
The main problems included:
- No air expanding shaft on the original machine
- Difficult roll loading and unloading
- Longer roll changeover time
- Limited technical information available from the customer
- No in-house engineering team to redesign the machine
- Need to upgrade the machine while maintaining compatibility with the existing structure
Instead of asking the customer to redesign the entire rewinding machine, XW Machinery developed a practical retrofit solution around the existing equipment.

Engineering Analysis Based on Machine Photos and Dimensions
The customer provided only machine photos and several important installation dimensions.
Our engineers reviewed:
- Existing shaft installation structure
- Shaft diameter and length
- Bearing and mounting positions
- Available installation space
- Roll loading method
- Safety chuck installation requirements
- Rewinding operating conditions
Based on the existing machine configuration, we designed a customized air expanding shaft system that could replace the original mechanical shaft and significantly simplify roll loading and unloading.
Two Customized Air Shaft Upgrade Solutions
After evaluating the customer's machine, XW Machinery proposed two possible configurations.
Solution 1: Custom Air Shaft + 28 Type Safety Chuck
The first option used a customized air expanding shaft together with a 28 type safety chuck.
This solution could meet the basic installation and rewinding requirements while allowing the customer to upgrade from a traditional mechanical shaft to a pneumatic roll holding system.
Solution 2: Custom Air Shaft + 35 Type Safety Chuck
The second option used a customized air expanding shaft together with a larger 35 type safety chuck.
The 35 type safety chuck provides a stronger and more robust shaft support structure, making it suitable for the customer's machine configuration and long-term rewinding operation.
After comparing both solutions, the customer selected:
Custom Air Expanding Shaft + 35 Type Safety Chuck


Final Solution Selected by the Polish Customer
The final configuration consisted of:
- Customized Air Expanding Shaft
- 35 Type Safety Chuck
- Custom shaft ends according to the original machine
- Dimensions matched to the customer's existing rewinding equipment
- Pneumatic expanding structure for easier roll installation
- Engineering design based on machine photos and customer measurements
The customized air shaft allows the operator to grip and release the roll core quickly through air inflation and deflation.
Combined with the 35 type safety chuck, the upgraded shaft can be installed securely on the rewinding machine while making roll loading and unloading significantly easier than the original mechanical shaft.

Benefits of the Machine Upgrade
After replacing the original mechanical shaft with the customized air shaft system, the customer can achieve:
Faster Roll Changeover
The pneumatic expanding mechanism makes installing and removing film rolls much easier.
Easier Loading and Unloading
Operators no longer need to rely on the original complicated mechanical shaft locking method.
Improved Production Efficiency
Reducing roll changeover time helps minimize machine downtime during rewinding production.
Retrofit Without Replacing the Entire Machine
The solution was designed around the customer's existing machine structure, helping avoid unnecessary equipment replacement.
Customized Installation
The air shaft ends and safety chuck configuration were designed according to the actual dimensions of the customer's machine.
Engineering Support for Customers Without a Technical Team
One of the most important parts of this project was that the customer did not have a professional engineering team.
They were unable to provide complete machine drawings or redesign the shaft system themselves.
They only sent XW Machinery:
- Machine photos
- Original shaft dimensions
- Basic installation measurements
- Application information
Our engineers used this information to analyze the existing equipment, compare different installation possibilities, and provide two practical machine upgrade solutions.
This is an important part of XW Machinery's service.
We do not only manufacture air shafts.
XW Machinery can help film, paper, packaging and converting factories upgrade existing winding and rewinding machines, even when the customer does not have an internal technical team.
XW Machinery Custom Air Shaft Solutions
XW Machinery manufactures customized air expanding shafts for:
- Film rewinding machines
- Slitting machines
- Printing machines
- Packaging machines
- Paper converting equipment
- Foil processing lines
- Nonwoven production equipment
- Roll-to-roll production lines
Available configurations include:
- Lug Type Air Shaft
- Leaf Type Air Shaft
- Strip Type Air Shaft
- Aluminum Air Shaft
- Steel Air Shaft
- Custom Air Expanding Shaft
- Air Shaft with Safety Chuck
- Air Shaft Retrofit Solutions
Shaft diameter, working length, shaft ends, load capacity and installation structure can all be customized according to the customer's machine.
Need to Upgrade an Existing Rewinding Machine?
If your machine is still using a traditional mechanical shaft and roll loading or unloading is inconvenient, replacing it with a customized air expanding shaft can be an effective upgrade.
Even if you do not have complete technical drawings, you can send XW Machinery:
Machine photos + shaft dimensions + roll specifications + application information
Our engineering team can evaluate the existing machine and recommend a suitable air shaft and safety chuck configuration.
XW Machinery — Custom Air Shaft Manufacturer & Roll-to-Roll Machine Upgrade Solution Provider